Global
USA
Poland
Malaysia
Japan
Серия W:
Вопросы-Ответы
The schedule timing does not leave for cleaning.
Make sure that the clock time and the schedule time are all setting successfully. Don't turn the power switch off when the schedule time was sited, otherwise the schedule time will lost.
Working with loudly noise.
1. Please check the main brush and side brush for entangled foreign matter, if so, please take out the brush and clean it
2. Please clean the filter of the dust box,（please note that the high-efficiency filter cannot be washed with water）
3. When the main brush and side brush are not installed, directly run the machine to see if there is any abnormal sound. If not, it may be the sound made by the main brush or side brush when it is working, which is normal
4. If the sound is too harsh, or the working sound of the machine is greater than 70 decibels, please record the video and send it to the technical support mailbox
2. Please clean the filter of the dust box,（please note that the high-efficiency filter cannot be washed with water）
3. When the main brush and side brush are not installed, directly run the machine to see if there is any abnormal sound. If not, it may be the sound made by the main brush or side brush when it is working, which is normal
4. If the sound is too harsh, or the working sound of the machine is greater than 70 decibels, please record the video and send it to the technical support mailbox
The robot cannot avoid obstacles and will directly hit it.
Due to the infrared sensor in bumper,the robot will gently hit the really dark furniture but will not cause any damage.
Can not find the charging station?
The charging station is placed against the wall, each side is 0.5 meters, and there is no obstacle in the front 1.5 meters. Away from signal interference, such as router TVs,mirrors, windows, etc.
